System Audio - Verify Audio EffectsDiscovery (Manual) - Desktop

Important

   This test requires supplemental content. You can find this content in the 'Windows HLK supplemental test content' section at the following location:

 

  • Test1/Test2

    Use WinRT APIs to check for the existence of raw mode support on a capture or render audio device. To support raw mode, the driver must support the new DDI for audio signal processing modes.

  • Test3/Test4

    Check for effects that are turned on by default in capture or render device on raw or default streams. On raw streams, the only expected effects are endpoint mode effects such as speaker compensation or speaker protection. On render stream of the Communication category, no effects are expected other than endpoint effects. The presence of effects in the Other category can also fail the test.

  • Test 5/Test 6

    In this test, all effects are disabled and then raw and default streams are queried to ensure that no effects other than must-have effects are on in the pipeline. Must-have effects include endpoint effects that cannot or should not be turned off.

  • Manual tests:

    This test ensures that when each of the effects on the UI (Microsoft Store App UI, or Enhancements tab in Sound Control panel) is enabled, the effects list shows up correctly.

    If you are implementing effects for a modern system with the Microsoft Store App UI (Hardware Support App), you must expose its UI to the user to enable/disable audio effects. Ensure that UI is functioning correctly for each applicable device.

    If you are implementing a legacy system with enhancements reported in the Sound Control panel, the test will iterate through each render/capture device and show the initial list of default effects on raw and default streams. It then prompts you to enable the effects on the UI. You can enable the effects one at a time or all at once. You should pay attention to the list of effects displayed as they choose each option. This should be repeated for each device. After the tests are done, you should press Enter to proceed. You are asked if the list of effects displayed is accurate. You can select Y or N as answer.

Test details

   
Specifications
  • System.Fundamentals.SystemAudio.Audio
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 1
Category Development
Timeout (in minutes) 60
Requires reboot false
Requires special configuration true
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Audio Device Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Audio Testing.

More information

Parameters

Parameter name Parameter description
LLU_NetAccessOnly LLU