Solving the TLS 1.0 Problem, 2nd Edition

This document presents the latest guidance on rapidly identifying and removing Transport Layer Security (TLS) protocol version 1.0 dependencies in software built on top of Microsoft operating systems, following up with details on product changes and new features delivered by Microsoft to protect your own customers and online services. It is intended to be used as a starting point for building a migration plan to a TLS 1.2+ network environment. While the solutions discussed here may carry over and help with removing TLS 1.0 usage in non-Microsoft operating systems or crypto libraries, they are not a focus of this document.

TLS 1.0 is a security protocol first defined in 1999 for establishing encryption channels over computer networks. Microsoft has supported this protocol since Windows XP/Server 2003. While no longer the default security protocol in use by modern OSes, TLS 1.0 is still supported for backwards compatibility. Evolving regulatory requirements as well as new security vulnerabilities in TLS 1.0 provide corporations with the incentive to disable TLS 1.0 entirely.

Microsoft recommends customers get ahead of this issue by removing TLS 1.0 dependencies in their environments and disabling TLS 1.0 at the operating system level where possible. Given the length of time TLS 1.0 has been supported by the software industry, it is highly recommended that any TLS 1.0 deprecation plan include the following:

  • Code analysis to find/fix hardcoded instances of TLS 1.0 or older security protocols.

  • Network endpoint scanning and traffic analysis to identify operating systems using TLS 1.0 or older protocols.

  • Full regression testing through your entire application stack with TLS 1.0 disabled.

  • Migration of legacy operating systems and development libraries/frameworks to versions capable of negotiating TLS 1.2 by default.

  • Compatibility testing across operating systems used by your business to identify any TLS 1.2 support issues.

  • Coordination with your own business partners and customers to notify them of your move to deprecate TLS 1.0.

  • Understanding which clients may no longer be able to connect to your servers once TLS 1.0 is disabled.

The goal of this document is to provide recommendations which can help remove technical blockers to disabling TLS 1.0 while at the same time increasing visibility into the impact of this change to your own customers. Completing such investigations can help reduce the business impact of the next security vulnerability in TLS 1.0. For the purposes of this document, references to the deprecation of TLS 1.0 also include TLS 1.1.

Enterprise software developers have a strategic need to adopt more future-safe and agile solutions (otherwise known as Crypto Agility) to deal with future security protocol compromises. While this document proposes agile solutions to the elimination of TLS hardcoding, broader Crypto Agility solutions are beyond the scope of this document.

The Current State of Microsoft's TLS 1.0 implementation

Microsoft's TLS 1.0 implementation is free of known security vulnerabilities. Due to the potential for future protocol downgrade attacks and other TLS 1.0 vulnerabilities not specific to Microsoft's implementation, it is recommended that dependencies on all security protocols older than TLS 1.2 be removed where possible (TLS 1.1/1.0/ SSLv3/SSLv2).

In planning for this migration to TLS 1.2+, developers and system administrators should be aware of the potential for protocol version hardcoding in applications developed by their employees and partners. Hardcoding here means that the TLS version is fixed to a version that is outdated and less secure than newer versions. TLS versions newer than the hardcoded version cannot be used without modifying the program in question. This class of problem cannot be addressed without source code changes and software update deployment. Protocol version hardcoding was commonplace in the past for testing and supportability purposes as many different browsers and operating systems had varying levels of TLS support.

Supported versions of TLS in Windows

Many operating systems have outdated TLS version defaults or support ceilings that need to be accounted for.

Figure 1: Security Protocol Support by OS Version

Windows OS SSLv2 SSLv3 TLS 1.0 TLS 1.1 TLS 1.2 TLS 1.3
Windows Vista Enabled Enabled Enabled Not Supported Not Supported Not Supported
Windows Server 2008 Enabled Enabled Enabled Disabled* Disabled* Not Supported
Windows 7 (WS2008 R2) Enabled Enabled Enabled Disabled* Disabled* Not Supported
Windows 8 (WS2012) Disabled Enabled Enabled Enabled Enabled Not Supported
Windows 8.1 (WS2012 R2) Disabled Enabled Enabled Enabled Enabled Not Supported
Windows 10 Disabled Enabled Enabled Enabled Enabled Not Supported
Windows 11 Disabled Enabled Enabled Enabled Enabled Enabled
Windows Server 2016 Not Supported Disabled Enabled Enabled Enabled Not Supported
Windows Server 2016 Not Supported Disabled Enabled Enabled Enabled Not Supported
Windows Server 2019 Not Supported Disabled Enabled Enabled Enabled Not Supported
Windows Server 2019 GS edition Not Supported Disabled Disabled Disabled Enabled Not Supported
Windows Server 2022 Not Supported Disabled Disabled Disabled Enabled Enabled

Windows Server 2019 GS edition is Microsoft SDL compliant, TLS 1.2 only with a restricted set of cipher suites.

Windows Server 2022 edition is Microsoft SDL compliant, TLS 1.2 and TLS 1.3 only with a restricted set of cipher suites.

TLS 1.1/1.2 can be enabled on Windows Server 2008 via this optional Windows Update package.

For more information on TLS 1.0/1.1 deprecation in IE/Edge, see Modernizing TLS connections in Microsoft Edge and Internet Explorer 11, Site compatibility-impacting changes coming to Microsoft Edge and Disabling TLS/1.0 and TLS/1.1 in the new Edge Browser

A quick way to determine what TLS version will be requested by various clients when connecting to your online services is by referring to the Handshake Simulation at Qualys SSL Labs. This simulation covers client OS/browser combinations across manufacturers. See Appendix A at the end of this document for a detailed example showing the TLS protocol versions negotiated by various simulated client OS/browser combinations when connecting to www.microsoft.com.

If not already complete, it is highly recommended to conduct an inventory of operating systems used by your enterprise, customers and partners (the latter two via outreach/communication or at least HTTP User-Agent string collection). This inventory can be further supplemented by traffic analysis at your enterprise network edge. In such a situation, traffic analysis will yield the TLS versions successfully negotiated by customers/partners connecting to your services, but the traffic itself will remain encrypted.

Microsoft's Engineering Improvements to eliminate TLS 1.0 dependencies

Since the v1 release of this document, Microsoft has shipped a number of software updates and new features in support of TLS 1.0 deprecation. These include:

  • IIS custom logging to correlate client IP/user agent string, service URI, TLS protocol version and cipher suite.

    • With this logging, admins can finally quantify their customers' exposure to weak TLS.
  • SecureScore - To help Office 365 tenant admins identify their own weak TLS usage, the SecureScore portal has been built to share this information as TLS 1.0 exited support in Office 365 in October 2018.

    • This portal provides Office 365 tenant admins with the valuable information they need to reach out to their own customers who may be unaware of their own TLS 1.0 dependencies.

    • Please visit https://securescore.microsoft.com/ for more information.

  • .Net Framework updates to eliminate app-level hardcoding and prevent framework-inherited TLS 1.0 dependencies.

  • Developer Guidance and software updates have been released to help customers identify and eliminate .Net dependencies on weak TLS: Transport Layer Security (TLS) best practices with the .NET Framework

    • FYI: All apps targeting .NET 4.5 or below are likely going to have to be modified in order to support TLS 1.2.
  • TLS 1.2 has been backported to Windows Server 2008 SP2 and XP POSReady 2009 to help customers with legacy obligations.

  • More announcements will be made in early 2019 and communicated in subsequent updates of this document.

Finding and fixing TLS 1.0 dependencies in code

For products using the Windows OS-provided cryptography libraries and security protocols, the following steps should help identify any hardcoded TLS 1.0 usage in your applications:

  1. Identify all instances of AcquireCredentialsHandle(). This helps reviewers get closer proximity to code blocks where TLS may be hardcoded.

  2. Review any instances of the SecPkgContext_SupportedProtocols and SecPkgContext_ConnectionInfo structures for hardcoded TLS.

  3. In native code, set any non-zero assignments of grbitEnabledProtocols to zero. This allows the operating system to use its default TLS version.

  4. Disable FIPS Mode if it is enabled due to the potential for conflict with settings required for explicitly disabling TLS 1.0/1.1 in this document. See Appendix B for more information.

  5. Update and recompile any applications using WinHTTP hosted on Server 2012 or older.

    1. Managed apps – rebuild and retarget against the latest .NET Framework version

    2. Applications must add code to support TLS 1.2 via WinHttpSetOption

  6. To cover all the bases, scan source code and online service configuration files for the patterns below corresponding to enumerated type values commonly used in TLS hardcoding:

    1. SecurityProtocolType

    2. SSLv2, SSLv23, SSLv3, TLS1, TLS 10, TLS11

    3. WINHTTP_FLAG_SECURE_PROTOCOL_

    4. SP_PROT_

    5. NSStreamSocketSecurityLevel

    6. PROTOCOL_SSL or PROTOCOL_TLS

The recommended solution in all cases above is to remove the hardcoded protocol version selection and defer to the operating system default. If you are using DevSkim, click here to see rules covering the above checks which you can use with your own code.

Windows PowerShell uses .NET Framework 4.5, which does not include TLS 1.2 as an available protocol. To work around this, two solutions are available:

  1. Modify the script in question to include the following:

    [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.SecurityProtocolType]::Tls12;
    
  2. Add a system-wide registry key (e.g. via group policy) to any machine that needs to make TLS 1.2 connections from a .NET app. This will cause .NET to use the "System Default" TLS versions which adds TLS 1.2 as an available protocol AND it will allow the scripts to use future TLS Versions when the OS supports them. (e.g. TLS 1.3)

    reg add HKLM\SOFTWARE\Microsoft.NETFramework\v4.0.30319 /v SystemDefaultTlsVersions /t REG_DWORD /d 1 /f /reg:64

    reg add HKLM\SOFTWARE\Microsoft.NETFramework\v4.0.30319 /v SystemDefaultTlsVersions /t REG_DWORD /d 1 /f /reg:32

Solutions (1) and (2) are mutually-exclusive, meaning they need not be implemented together.

Rebuild/retarget managed applications using the latest .Net Framework version

Applications using .NET framework versions prior to 4.7 may have limitations effectively capping support to TLS 1.0 regardless of the underlying OS defaults. Refer to the below diagram and Transport Layer Security (TLS) best practices with the .NET Framework for more information.

Rebuild managed applications

SystemDefaultTLSVersion takes precedence over app-level targeting of TLS versions. The recommended best practice is to always defer to the OS default TLS version. It is also the only crypto-agile solution that lets your apps take advantage of future TLS 1.3 support.

If you are targeting older versions of .NET Framework such as 4.5.2 or 3.5, then by default your application will use the older and not recommended protocols such as SSL 3.0 or TLS 1.0. It is strongly recommended that you upgrade to newer versions of .NET Framework such as .NET Framework 4.6 or set the appropriate registry keys for 'UseStrongCrypto'.

Testing with TLS 1.2+

Following the fixes recommended in the section above, products should be regression-tested for protocol negotiation errors and compatibility with other operating systems in your enterprise.

  • The most common issue in this regression testing will be a TLS negotiation failure due to a client connection attempt from an operating system or browser that does not support TLS 1.2.

    • For example, a Vista client will fail to negotiate TLS with a server configured for TLS 1.2+ as Vista's maximum supported TLS version is 1.0. That client should be either upgraded or decommissioned in a TLS 1.2+ environment.
  • Products using certificate-based Mutual TLS authentication may require additional regression testing as the certificate-selection code associated with TLS 1.0 was less expressive than that for TLS 1.2.

    • If a product negotiates MTLS with a certificate from a non-standard location (outside of the standard named certificate stores in Windows), then that code may need updating to ensure the certificate is acquired correctly.
  • Service interdependencies should be reviewed for trouble spots.

    • Any services which interoperate with 3rd-party services should conduct additional interop testing with those 3rd parties.

    • Any non-Windows applications or server operating systems in use require investigation / confirmation that they can support TLS 1.2. Scanning is the easiest way to determine this.

A simple blueprint for testing these changes in an online service consists of the following:

  1. Conduct a scan of production environment systems to identify operating systems which do not support TLS 1.2.

  2. Scan source code and online service configuration files for hardcoded TLS as described in "Finding and fixing TLS 1.0 dependencies in code"

  3. Update/recompile applications as required:

    1. Managed apps

      1. Rebuild against the latest .NET Framework version.

      2. Verify any usage of the SSLProtocols enumeration is set to SSLProtocols.None in order to use OS default settings.

    2. WinHTTP apps – rebuild with WinHttpSetOption to support TLS 1.2

  4. Start testing in a pre-production or staging environment with all security protocols older than TLS 1.2 disabled via registry.

  5. Fix any remaining instances of TLS hardcoding as they are encountered in testing. Redeploy the software and perform a new regression test run.

Notifying partners of your TLS 1.0 deprecation plans

After TLS hardcoding is addressed and operating system/development framework updates are completed, should you opt to deprecate TLS 1.0 it will be necessary to coordinate with customers and partners:

  • Early partner/customer outreach is essential to a successful TLS 1.0 deprecation rollout. At a minimum this should consist of blog postings, whitepapers or other web content.

  • Partners each need to evaluate their own TLS 1.2 readiness through the operating system/code scanning/regression testing initiatives described in above sections.

Conclusion

Removing TLS 1.0 dependencies is a complicated issue to drive end to end. Microsoft and industry partners are taking action on this today to ensure our entire product stack is more secure by default, from our OS components and development frameworks up to the applications/services built on top of them. Following the recommendations made in this document will help your enterprise chart the right course and know what challenges to expect. It will also help your own customers become more prepared for the transition.

Appendix A: Handshake Simulation for various clients connecting to www.microsoft.com, courtesy SSLLabs.com

Results of Handshake Simulation

Appendix B: Deprecating TLS 1.0/1.1 while retaining FIPS Mode

Follow the steps below if your network requires FIPS Mode but you also want to deprecate TLS 1.0/1.1:

  1. Configure TLS versions via the registry, by setting "Enabled" to zero for the unwanted TLS versions.

  2. Disable Curve 25519 (Server 2016 only) via Group Policy.

  3. Disable any cipher suites using algorithms that aren't allowed by the relevant FIPS publication. For Server 2016 (assuming the default settings are in effect) this is means disabling RC4, PSK and NULL ciphers.

Contributors/Thanks to

Mark Cartwright
Bryan Sullivan
Patrick Jungles
Michael Scovetta
Tony Rice
David LeBlanc
Mortimer Cook
Daniel Sommerfeld
Andrei Popov
Michiko Short
Justin Burke
Gov Maharaj
Brad Turner
Sean Stevenson